At 8:12 a.m., the ARK-1 wouldn’t boot because someone “cleaned” the sensor window with alcohol wipes and then killed the power strip; two minutes of gentle air, proper lens tissue, and the correct power‑up sequence and it behaved. I’m now labeling the console with the steps and doing a 5‑minute Monday refresher so the gear stays happy — what’s the funniest “maintenance fix” you’ve had to retrain out of your team?
Had our KR-800 act ‘hungover’ after someone wiped the window; a few puffs with a rocket blower, proper lens tissue, and a 5‑minute warm‑up fixed it. I added a little ‘no alcohol on optics’ sticker and a smart plug to automate the power‑up order — just don’t use the plug when doing firmware updates.
After an 8:12 a.m. oops, @nina_m85’s ‘no alcohol’ + a small UPS stopped power-strip surprises; verify boot order.